Back to 36'' Manual Tile Cutter Porcelain Cutter Machine Tungsten Carbide Cutting Wheel

Customer reviews

4.79 out of 5stars
(14 reviews)

Most helpful positive review

5.00 out of 5 stars review
Verified Purchaser
11/16/2020
Top performance at 1/3 the price.
After much research and comparison of tile cutters under $500, I chose what I hoped would be the least complicated most versital and precise tile cuter . at a little over $100 this cutter did not disappoint. The rail system is an outstanding design with zero play and a cutting wheel that mate perfect cuts. The cuts were so clean it was difficult to recognize which edge had been cut.
ed

Most helpful negative review

4.00 out of 5 stars review
Verified Purchaser
11/29/2021
Works great, with the right technique
I didn't use all the features such as the built-in square, etc. I measured and marked my 12" x 24" tile at either end and aligned with the scribing wheel. I found that several light passes to score the tile and then some light pressure with the wheel worked best with these particular tile, rather than using the metal "foot" to snap the tile.
JB
14 reviews
Filter by:
Sort by:
  • 5.00 out of 5 stars review
    Verified Purchaser
    01/05/2023
    Great cut
    Good tool with smooth edges. It’s heavy item with great materials. Before I thought is cheap plastic. Finally finished the bathroom with this good tool. Recommend! Easy cut and smooth.
    Iris
  • 5.00 out of 5 stars review
    Verified Purchaser
    12/06/2022
    trust this brand
    I have compared many products of the same type. Never quite sure which is better. Until I saw this sign. I've bought this brand before. It's really good quality. So this time I see. I didn't hesitate. Once I got the product. Sure enough. Very precise. I tiled a room. There is almost no waste. And it's sturdy. I like this brand. The blade is very sharp. One stroke will cut through the tile. It's not like other brands. It takes two or three trips
    Nathanli
  • 4.00 out of 5 stars review
    Verified Purchaser
    08/10/2022
    Great for the money
    I've done seven bathrooms with this tile cutter. The backbone is not as strong as I would like but if you score the tile well and pop it at the top not in the middle it works fine. I've done 36x24 large format tile with it just fine. It will do small stuff too.
    W. Meyer
  • 5.00 out of 5 stars review
    Verified Purchaser
    06/18/2022
    Great heavy duty cutter
    This tile cutter is built to last. The main rail and leverage handle is built for contractor use. It also cuts heavy grade wood textured porcelain tile clean and straight. I just wish they would have printed the size of the cutting wheel specs so I could order one without pulling off the old wheel to figure out the size for replacement. But that's the only thing I've found wrong and I can live with that.
    Linda M. Zubrowski
  • 4.00 out of 5 stars review
    Verified Purchaser
    11/29/2021
    Works great, with the right technique
    I didn't use all the features such as the built-in square, etc. I measured and marked my 12" x 24" tile at either end and aligned with the scribing wheel. I found that several light passes to score the tile and then some light pressure with the wheel worked best with these particular tile, rather than using the metal "foot" to snap the tile.
    JB
  • 5.00 out of 5 stars review
    Verified Purchaser
    09/13/2021
    Who needs a tile saw with this cutter
    Couldn’t find a tile saw to cut tiles over 24 inches. While we were waiting for a saw to restock, we purchased this cutter. It has done great!!! Made the job of tiling over 3,000 sq ft so much easier. Has held up great! Of course still need a tile saw for the crazy cuts but by having this cutter, our flooring and bathroom projects were not held up at all. Would recommend and will purchase this again if it does break down or dull over the next few projects.
    Amazon Customer
  • 5.00 out of 5 stars review
    Verified Purchaser
    05/12/2021
    Heavy Duty + Slices like Butter
    There are 2 rail systems out there but they don't line up when cutting, this one has a patented single I-Beam rail which tracks true. Is it large and heavy, you bet. But, that means it will last and tackle the job at hand. Best investment so far. Get them while you can. One note, no replacement blades available so you'll have to find similar one which they are around.
    Honest Reviews
  • 5.00 out of 5 stars review
    Verified Purchaser
    02/13/2021
    a Beast!
    I got the 36" model and Wow this thing is a Beast! only used it a little bit so far to cut some 2"hex tiles and love how the breaker foot thing that ya push down on to snap the tiles has a magnetic catch to hold it up out of the way, also it's stiff ridged design keeps a good amount of steady pressure on the cut.
    Ron Shaw
  • 5.00 out of 5 stars review
    Verified Purchaser
    02/07/2021
    Cuts like the $800 tile cutter!
    I looked at lots of cutters and bought this one because the I-beam construction was very similar to the extremely expensive manual tile cutters. So far, this thing is fantastic! It scores my rough porcelain planks and snaps them cleanly, with no chipping. Excellent buy!
    Mack S.
  • 5.00 out of 5 stars review
    Verified Purchaser
    11/16/2020
    Top performance at 1/3 the price.
    After much research and comparison of tile cutters under $500, I chose what I hoped would be the least complicated most versital and precise tile cuter . at a little over $100 this cutter did not disappoint. The rail system is an outstanding design with zero play and a cutting wheel that mate perfect cuts. The cuts were so clean it was difficult to recognize which edge had been cut.
    ed
  • 5.00 out of 5 stars review
    Verified Purchaser
    09/04/2020
    Better than I thought
    It works surprisingly well. Build quality is better than what you get at your big box stores. I had a job with 36" Tile. All floor tile that will be covered with base on the edges, so I didn't want to spend a lot on the big name brands. I wasn't too concerned with cut quality since it would all be covered. If you want to make rip cuts that are under 1" it won't do so well. Also there is a bit of chipping on textured tile. I haven't tried replacing with a better blade, that may improve things. The sliding bar is pretty stout and appears to be good quality. Overall this makes better cuts than the 24"~ Rubi at HD at about the same price.
    Sergey Poberezhniy
  • 4.00 out of 5 stars review
    Verified Purchaser
    08/07/2020
    Mixed feelings
    It cuts tile well for the most part . . . does not come with a manual on how to use "thigamajig" at top and there is NO online manual for helpful tile cutting tips. The measurements at the top are nonsensical . . . not sure even why they are there. Would be helpful if the numbers were measurements of the size of the tile you are cutting off.
    rmhchs
  • 5.00 out of 5 stars review
    Verified Purchaser
    05/14/2020
    Fun to use, cuts smooth!
    This tile cutter is really easy to use and makes super clean cuts! I had never used a thing like that, (first time diy tile installer) so I was a bit nervous since it's an investment and it's on the bulky side to try to return. I was happy to find out how great of an investment this is. At the end it was kinda fun to cut tiles!
    Lu K.
  • 5.00 out of 5 stars review
    Verified Purchaser
    03/20/2020
    Heavy, sturdy Tile Cutter
    This thing is awesome. I had to cut 18 x 18 tiles down to 18 x 10 3/4.The tile was 1/4" but had a textured top finish (not flat).It scored each one with ease a popped a clean break on every tile.Because of the non-standard edges on the tile, I had to mark the edgeof each cut with a pencil and then visually line these marks with the blade.Worked every time.I've used cheaper, light weight tile cutters that wobble and cause a lot of waste.This one is better by far.HIGHLY recommend.
    Kevin